Hammer Mill Supplier

Hammer Mill Supplier

Hammer Mill Supplier

Hammer Mill increases the added value of fly ash

Fly ash is fine ash collected from the flue gas after coal combustion. It is the main solid waste discharged from coal-fired power plants. As an active mineral fine powder resource, the finer the fineness of fly ash, the higher its activity and the higher the utilization value. Deep excavation of the added value of fly ash requires the support of the Hammer Mill and its grinding process.


Use of fly ash after processing by Hammer Mill

The performance and application value of fly ash is determined by particle size and particle morphology, while the grinding equipment of fly ash is selected according to the physical and chemical properties of fly ash and the fineness requirements of finished products. It has been proved by practice that, in view of the characteristics of fly ash, the fly ash grinding process of Hammer Mill equipment is a good choice for mining its added value.

Hammer Mill grinding process

At present, our commonly used Hammer Mill grinding process is divided into closed circuit process and open circuit process, each with advantages and disadvantages. The operation of the open circuit process is simple and convenient, and the material is finished after being ground, but the material stays in the mill for too long, which is likely to cause excessive grinding. Experts advocate a closed circuit process.

In the closed grinding process of the Hammer Mill, the Hammer Mill grinds the fly ash, and the powder crushing device of the Hammer Mill can timely discharge the finely ground fine powder, thereby effectively Avoid excessive grinding problems in open-circuit grinding processes. In addition, the material flow speed of the closed circuit process is relatively fast, the equipment production capacity is obviously improved, and the unit power consumption is greatly reduced, thereby effectively improving economic benefits.

Hammer Mill equipment manufacturers

Hammer Mill is so good, so which Hammer Mill equipment do you choose? Shanghai Shibang is your choice!

First of all, Shibang's Hammer Mill has a significant advantage in the grinding process. Its finished product size can reach 2500 mesh, which can be adjusted between 325~2500 mesh according to needs. The product fineness can reach D97≤5μm at one time.

Secondly, the high fineness does not affect its production capacity. Under the condition of the fineness of the finished product and the same motor power, the output of the SCM Hammer Mill is 40% higher than that of the jet mill and the agitator mill, and the system energy consumption is only the jet mill. One-third of the time, while ensuring high production efficiency and low energy consumption, the cost is low and the recycling period is short.

Once again, Shibang's Hammer Mill has low wear-resistance parts, and its wear-resistant parts are forged with special materials, which have a longer service life than the wear parts of ordinary mill equipment, generally more than one year. The equipment performance is stable.

Afterwards, Shibang strictly abides by the requirements of the green economy. It adopts a high-efficiency pulse dust collector in the Hammer Mill. The whole set of equipment has no dust pollution during operation. It is equipped with a silencer to reduce noise and truly achieve environmentally friendly and pollution-free operation.

Shibang Hammer Mill offers greater possibilities for deep excavation of added value of fly ash. Welcome to purchase Shibang Hammer Mill.

leave a comment